Projection Unit ......................................................... 7
Reset the Clock ........................................................ 8
Warnings ................................................................... 8
Troubleshooting ....................................................... 9
Technical Specifications ......................................... 9
Notices .................................................................... 10
Statement of Responsibility ................................ 10
About Oregon Scientific ........................................ 10
EC-Declaration of Conformity ............................... 10
Dual-Band RF
Projection Clock with FM Radio
Model: RRM326P
USER MANUAL
CONTENTS
Introduction .............................................................. 2
Product Overview .................................................... 2
Front View ............................................................ 2
Back View............................................................. 3
LCD Display ......................................................... 3
Getting Started ......................................................... 4
Batteries ............................................................... 4
AC Adaptor ........................................................... 4
About RF Reception................................................. 4
Turn the Radio Reception ON / OFF .................... 5
Clock / Calendar ....................................................... 5
Clock / Calendar Display ...................................... 5
Set Clock / Calendar ............................................ 5
FM Radio ................................................................... 6
Operating the Radio ............................................. 6
Radio Stations ...................................................... 6
Sleep .................................................................... 6
Backlight ................................................................... 6
Alarm ......................................................................... 7
Alarm Display and Sound ..................................... 7
Set the Alarm(s) ................................................... 7
Activate / Deactivate the Alarm(s) ........................ 7
Snooze / Turning the Alarm OFF .......................... 7
1
RRM326P_EN_output
1
03/09/2005, 14:44
7. PROJECTION ON: Slide to ON for continuous
image projection when the AC power is connected
8. ALARM ON / OFF: Switch alarm on or off
9. ALARM:Togglebetweenalarmandcalendardisplay
10. STATION: Toggle through preset radio stations
11. MODE:Togglebetweensettingmodes/confirmsettings
12. Battery Compartment (cover on): 2 x UM-3 / AA
1.5V batteries
BACK VIEW
LCD DISPLAY
1. Time
2. Alarm on / off
3. Radio alarm on / off
4. Alarm time
5. RF clock reception
6. Battery status
7. Offset time zone
8. AC adaptor is disconnected
9. FM radio display / sleep / volume level
1. FOCUS: Turn to focus the projected image
2. Image Rotation: Twist to rotate the image display
between the vertical and horizontal
3. 4.5V AC / DC Adaptor Socket
4. FM Radio Antenna Wire
5. RESET:Presstoreturnallvaluestothedefaultsettings
6. EU / UK: Select nearest radio signal base i.e.
England or Germany
3
RRM326P_EN_output
3
03/09/2005, 14:44
AC ADAPTOR
GETTING STARTED
BATTERIES
The batteries serve as a back-up power supply. For
continuous use of the projector, install theAC adaptor at
the base of the unit as shown below.
Batteries are supplied with this product:
•
2 x UM-3 / AA 1.5V batteries
NOTE Itisrecommendedthatyouusealkalinebatteries
with this product for longer performance.
Insert batteries before first use, matching the polarity
(+ and -) as shown below. Press RESET after each
battery change.
NOTE To helpconserveenergy,turnthePROJECTION
ON switch to OFF when you do not wish to use it.
ABOUT RF RECEPTION
This clock can automatically synchronize the date and
time with official time-keeping organizations in Frankfurt
(Germany) and Rugby (England). The unit can pick up a
Radio Frequency (RF) signal when it is within 1500km
(932 miles) of these locations.
NOTE Do not use rechargeable batteries with this
product.
BATTERY ICON
MEANING
Batteries are low, or there are no
batteries installed and only the
adaptor is connected
4
RRM326P_EN_output
4
03/09/2005, 14:44
To select the most suitable radio signal for your location,
slide the UK / EU switch to the appropriate setting. Press
RESET whenever you change the selected setting.
CLOCK / CALENDAR
CLOCK / CALENDAR DISPLAY
Press MODE to toggle between 3 types of display
(Clock with seconds, Clock with day, Clock with time
zone offset).
NOTE For best results, place the clock away from
metal or electrical objects, and near a window with a
clear view to the sky.
TURN THE RADIO RECEPTION ON / OFF
To turn the radio reception ON:
•
•
Press VOL
and hold for 2 seconds.
The RF reception icon will appear and flash on the
display to indicate it is searching for the RF signal.
SET CLOCK / CALENDAR
1. Press and hold MODE for 2 seconds. The time zone
offset hour digits will flash. When an offset hour has
been set (e.g. +1), the time displayed will be the RF
clock time plus 1 hour.
Oncebatterieshavebeeninstalledintheclock,thereception
icon will flash to indicate it is searching for a signal.
Whenthereceptionsignalhasbeenreceivedthereception
icon will show the signal strength by displaying between
0 and 3 waves:
STRONG SIGNAL WEAK SIGNAL
NO SIGNAL
To turn the radio reception OFF:
•
•
Press and hold VOL
TheRFreceptioniconwilldisappearfromthedisplay.
for 2 seconds.
5
RRM326P_EN_output
5
03/09/2005, 14:44
2. Press VOL
or
to change the setting.
3. Press TUNING
or
to change radio frequency,
3. Press MODE to confirm the setting and move onto
the next one.
press and hold for 2 seconds to enable auto-search
for an available frequency.
4. Thesettingsappearinthefollowingorder:Timezone
hour offset, 12 / 24 hour format, hour, minute, year,
MM / DD or DD / MM format, month, day and
language for day of the week.
4. Press any key to stop auto-search.
RADIO STATIONS
To set a radio station, press and hold STATION while on
a frequency. The unit can store up to 8 preset stations in
chronological order.
5. PressALARM,ALARMON/OFF,TUNING or
,
SLEEP, or RADIO to exit the Clock Setting Mode.
Press STATION to return to the last station that you
listenedto. UsetheSTATIONbuttontoscrollthroughthe
8 preset stations.
FM RADIO
Thisproducthasabuilt-inFMradioforyourentertainment.
In order to conserve power, the FM radio only works
when the AC adaptor is plugged in.
SLEEP
The radio is equipped with a countdown sleep timer that
can be set to switch the radio off after up to 120 minutes.
OPERATING THE RADIO
1. Press RADIO to switch the radio on.
1. Press SLEEP to enter sleep mode.
2. Use the SLEEP button to change the sleep time
setting (120, 90, 60, 45, 30, 15, 0).
3. Press any key to exit sleep mode – the sleep timer
will be automatically activated.
BACKLIGHT
Press SNOOZE / LIGHT to activate the backlight for 5
seconds.
2. Press VOL
or
to change the radio volume.
6
RRM326P_EN_output
6
03/09/2005, 14:44
6. Press ALARM to exit alarm setting mode.
7. The daily alarm will be on automatically after setting.
ALARM
ALARM DISPLAY AND SOUND
This product has two types of daily alarm that can be set
to go off at the same time every day. You can choose to
be woken up by the radio or by a buzzer alarm. Press
ALARM at any time to toggle between the calendar and
the alarm display.
ACTIVATE / DEACTIVATE THE ALARM(S)
•
•
Press the ALARM ON / OFF to enable or disable the
daily alarm.
Whenthebuzzeralarm/radioalarmiconappearson
the display the alarm is activated. When the icons do
notappearthebuzzeralarm/radioalarmisdeactivated.
NOTE If the radio alarm time is reached when the AC
adaptorisnotconnectedtheunitwilldefaultto buzzeralarm.
SNOOZE / TURNING THE ALARM OFF
When activated, the alarm icon flashes, the backlight
and projector turn on for 8 seconds. The buzzer alarm
sounds for 2 minutes if no key is pressed. The radio will
remain on for 120 minutes if no key is pressed.
SET THE ALARM(S)
1. Press and hold ALARM for 2 seconds.
2. Use VOL
or
to change the flashing setting.
To silence the alarm:
•
Press SNOOZE / LIGHT to silence it for 8 minutes.
The buzzer alarm or radio alarm icon will flash to
show snooze is enabled.
OR
•
Press any key except SNOOZE / LIGHT to mute the
alarm and activate it again in 24 hours.
3. Press ALARM to confirm the setting and move onto
the next one.
4. The settings appear in the following order: Hour,
minute, alarm type (i.e. radio alarm or buzzer alarm).
5. If radio alarm is selected, preset station and preset
volume can also be altered.
PROJECTION UNIT
The projection unit can display both time and alarm
status. To use this feature:
7
RRM326P_EN_output
7
03/09/2005, 14:44
•
Slide the PROJECTION switch ON to activate
continuous projection. However, this function will not
work unless the AC / DC adaptor is used.
Adjust the FOCUS knob to make the image clearer.
Manually tilt the projection unit to position the image.
WARNINGS
This product is designed to give you years of service if
handledproperly.OregonScientificwillnotberesponsible
for any deviations in the usage of the device from those
specified in the user instructions or any unapproved
alterationsorrepairsoftheproduct.Observethefollowing
guidelines:
•
•
NOTE YoucanalsopresstheSNOOZE/LIGHTbutton
to project the time and alarm status for 5 seconds.
•
Do not clean any part of the product with benzene,
thinner or other solvent chemicals – this may cause
permanentdamagethatisnotcoveredbytheguarantee.
When necessary, clean it with a damp cloth.
Never immerse the product in water. This can cause
electrical shock and damage the product.
Do not subject the product to extreme force, shock,
or fluctuations in temperature or humidity.
Do not tamper with the internal components.
Do not mix new and old batteries or batteries of
different types.
RESET THE CLOCK
Insert a thin blunt instrument into the hole below RESET
to return to the default settings.
•
•
The default settings are:
EU Clock Time:
UK Clock Time:
Date:
12.00
12:00 pm
1st January 2005
English
+0
6.00 AM
•
•
Language:
Time Offset:
Alarm Time:
•
•
Do not use rechargeable batteries with this product.
Remove the batteries if storing this product for a long
period of time.
Daily Alarm(s):
EU Display Setting:
UK Display Setting:
Disabled
24hr, DD / MM
12hr, DD / MM
•
Do not scratch the LCD display.
NOTE The technical specification of this product and
contents of this user manual are subject to change
without notice. Images not drawn to scale.
8
RRM326P_EN_output
8
03/09/2005, 14:44
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
PROBLEM
SYMPTOM
REMEDY
TYPE
DESCRIPTION
Clock time is
not correctly set reception
No radio signal Place the clock far
Main Unit Dimensions
L x W x H
away from PCs,
phones, and other
electronicequipment
andnearawindowsill.
Waitforatleast24
hours
161 x 30 x 103 mm
(6.34 x 1.18 x 4.06 inches)
Weight (without battery) 235 g (0.52 lbs)
Main Unit RF
RF Clock Frequency
System
DCF77 (EU) or MSF60 (UK)
No alarm
Alarm does not Turnonthe setting
sound
Synchronization
FM Band Range
Main Unit Display
Clock
Auto or disabled
87.5-108.0 MHz
Operation
not normal
Certain functions Reset the clock
do not perform
HH:MM:SS
HH:MM: Day of week
HH:MM:Timezonehouroffset
Calendar
Strange day
Check it is set to
yourownlanguage
Clock
Cannot change Disable the radio
Hour Format
Calendar
12hr AM / PM (MSF Format)
24hr (DCF Format)
clock
signal and set
manually
DD / MM or MM / DD, user
selectable. Weekdaylanguage:
E, D, F, I, S.
Clock / Calendar Cannot auto-
synchronize
1.Adjustbatteries
2. Press RESET
the clock
Alarm
•
•
2-minute alarm
8-minute snooze
Power
Main Unit
2 x UM-3 / AA 1.5V batteries
or 4.5V AC / DC adaptor
9
RRM326P_EN_output
9
03/09/2005, 14:44
We hope you will find all the information you need on our
website, however if you’re in the US and would like to
contacttheOregonScientificCustomerCaredepartment
directly,pleasevisit:www2.oregonscientific.com/service/
support
NOTE Itisrecommendedthatyouusealkalinebatteries
with this product for longer performance.
NOTE Designandspecificationsaresubjecttochange
without notice.
OR
NOTICES
Call 949-608-2848.
STATEMENT OF RESPONSIBILITY
Oregon Scientific will not be held liable for any bodily
injury, death, property damages, or any other claims of
whatevernatureresultingfromthemisuseornegligence
of the product, whether intentional or unintentional.
For international enquiries, please visit:
www2.oregonscientific.com/about/international/
default.asp
OregonScientificwillnotberesponsibleforanydeviations
intheusageofthedevicefromthosespecifiedintheuser
instructions or any unapproved alternations or repairs of
the product.
EC-DECLARATION OF CONFORMITY
Hereby,OregonScientific,declaresthatthisDual-Band
RF Projection Clock with FM Radio RRM326P is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
ABOUT OREGON SCIENTIFIC
AcopyofthesignedanddatedDeclarationofConformity
isavailableonrequestviaourOregonScientificCustomer
Service.
more about Oregon Scientific products such as digital
cameras;MP3players;children’selectroniclearningproducts
and games; projection clocks; health and fitness gear;
weatherstations;anddigitalandconferencephones.The
websitealsoincludescontactinformationforourcustomer
care department in case you need to reach us, as well as
frequently asked questions and customer downloads.
COUNTRIES RTTE APPROVAL COMPLIED
All EC countries, Switzerland CH
and Norway
N
10
RRM326P_EN_output
10
03/09/2005, 14:44
Dual-Band RF Projection Clock with FM Radio
Model: RRM326P
USER MANUAL
RRM326P_EN_output
11
03/09/2005, 14:44
© 2005 Oregon Scientific. All rights reserved.
086-003827-010
RRM326P_EN_output
12
03/09/2005, 14:44
|